Home Categories Send inquiry

Active Harmonic Filters(AHF-50-0.4-4L-W)

Working Principle

External CT detects the load current, DSP as CPU has advanced logic control arithmetic, could quickly track the instruction current, divides the load current into active power and reactive power by using the intelligent FFT, and calculates the harmonic content rapidly and accurately. Then it sends PWM signal to internal IGBT's driver board to control IGBT on and off at 20KHZ frequency. Finally generates opposite phase compensation current on inverter induction, at the same time CT also detects the output current and negative feedback goes to DSP. Then DSP proceeds the next logical control to achieve more accurate and stable system.

Technical Specifications

TYPE

Series 220V

Series 400V

Series 500V

Series 690V

Max neutral wire current

23A

15A、25A、50A、
75A、100A、150A

100A

100A

Nominal voltage

AC220V(-20%~+20%)

AC380V(-20%~+20%)

AC500V(-20%~+20%)

AC690V(-20%~+20%)

Rated frequency

50Hz±5%

Network

Single phase

Three-phase three-wire/three-phase four-wire

Response time

<40ms

Harmonics filtering

2th to 50th Harmonics,The number of compensation can be selected, and the range of single compensation can be adjusted

Harmonic compensation rate

>92%

Neutral line filtering capability

/

The filtering capacity of three-phase four-wire neutral line is 3 times of that of phase filtering

machine efficiency

>97%

Switching frequency

32kHz

16kHz

12.8kHz

12.8kHz

Feature selection

Deal with harmonics

Numbers in parallel

No limitation. A single centralized monitoring module can be equipped with up to 8 power modules

Communication methods

Two-channel RS485 communication interface (support GPRS/WIFI wireless communication)

Altitude without derating

<2000m

Temperature

-20~+50°C

Humidity

<90% RH,The average monthly minimum temperature is 25℃ without condensation on the surface

Pollution level

Below level Ⅲ

Protection function

Overload protection, hardware over-current protection, over-voltage protection, power failure protection, over-temperature protection, frequency anomaly protection, short circuit protection, etc

Noise

<50dB

<60dB

<65dB

Installation

Rack/wall hanging

Rack

Into the way of line

Back entry (rack type), top entry (wall-mounted)

Top entry

Protection grade

IP20

Product naming

Product Appearance


Active Harmonic Filters(AHF-50-0.4-4L-W) Related Video: